| | | | , ,
 . , LCD   .   . ,

, , – 16
+7 (495) 212-08-30
 
 
 
 
 
 
 
 
 
 
 
-
 
 
 
 
 
 
 
 
   
 
 
   
  3
  :
 
2-
CROWN XTi1002 , , ,    AV-PROM
 

2- CROWN XTi1002

Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
3 User-defined fan mode controls normal, early and fullspeed for matching fan performance to a specific application
New system monitoring provides software visibility of AC line voltage and power supply temperature
Integrated cast-aluminum handles for easy handling and enhanced durability
Locking power cord clip provides a secure connection between the amplifier and power cord
Updated HiQnet Band Manager and System Architect control software
Increased number of presets to a total of 50; 49 of which are user definable
- Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
- Frequency Response (at 1 watt, 20 Hz 20 kHz): +0 dB, 1 dB
- Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms):
XTi1002/2002/4002: 100 dB (A weighted); XTi6002: 103 dB (A weighted)
- Total Harmonic Distortion (THD): < 0.5%
- Damping Factor 20 Hz to 1 kHz: > 500
- Crosstalk (below rated power): 20 kHz 1 kHz: > 70 db
- Input Impedance(nominal): 20k ohms balanced, 10k ohms unbalanced
- Maximum Input Signal: +22 dBu typical
- AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
- AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch):
XTi1002: 6.8A; no more than 38W at idle
XTi2002: 8.3A; no more than 38W at idle
XTi4002: 10.5A; no more than 38W at idle
XTi6002: 15.3A; no more than 180W at idle
- Operating Temperature: 0C to 40C at 95% relative humidity (non-condensing)
61 941 
, 24/09/2018
 1 .
 
CROWN XTi2002 , , ,    AV-PROM
 

2- CROWN XTi2002

Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
3 User-defined fan mode controls normal, early and fullspeed for matching fan performance to a specific application
New system monitoring provides software visibility of AC line voltage and power supply temperature
Integrated cast-aluminum handles for easy handling and enhanced durability
Locking power cord clip provides a secure connection between the amplifier and power cord
Updated HiQnet Band Manager and System Architect control software
Increased number of presets to a total of 50; 49 of which are user definable
- Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
- Frequency Response (at 1 watt, 20 Hz 20 kHz): +0 dB, 1 dB
- Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms):
XTi1002/2002/4002: 100 dB (A weighted); XTi6002: 103 dB (A weighted)
- Total Harmonic Distortion (THD): < 0.5%
- Damping Factor 20 Hz to 1 kHz: > 500
- Crosstalk (below rated power): 20 kHz 1 kHz: > 70 db
- Input Impedance(nominal): 20k ohms balanced, 10k ohms unbalanced
- Maximum Input Signal: +22 dBu typical
- AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
- AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch):
XTi1002: 6.8A; no more than 38W at idle
XTi2002: 8.3A; no more than 38W at idle
XTi4002: 10.5A; no more than 38W at idle
XTi6002: 15.3A; no more than 180W at idle
- Operating Temperature: 0C to 40C at 95% relative humidity (non-condensing)
82 620 
, 24/09/2018
 1 .
 
CROWN XTi4002 , , ,    AV-PROM
 

2- CROWN XTi4002

Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
3 User-defined fan mode controls normal, early and fullspeed for matching fan performance to a specific application
New system monitoring provides software visibility of AC line voltage and power supply temperature
Integrated cast-aluminum handles for easy handling and enhanced durability
Locking power cord clip provides a secure connection between the amplifier and power cord
Updated HiQnet Band Manager and System Architect control software
Increased number of presets to a total of 50; 49 of which are user definable
- Sensitivity (for full rated power at 4 ohms): 1.4 Vrms
- Frequency Response (at 1 watt, 20 Hz 20 kHz): +0 dB, 1 dB
- Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms):
XTi1002/2002/4002: 100 dB (A weighted); XTi6002: 103 dB (A weighted)
- Total Harmonic Distortion (THD): < 0.5%
- Damping Factor 20 Hz to 1 kHz: > 500
- Crosstalk (below rated power): 20 kHz 1 kHz: > 70 db
- Input Impedance(nominal): 20k ohms balanced, 10k ohms unbalanced
- Maximum Input Signal: +22 dBu typical
- AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
- AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch):
XTi1002: 6.8A; no more than 38W at idle
XTi2002: 8.3A; no more than 38W at idle
XTi4002: 10.5A; no more than 38W at idle
XTi6002: 15.3A; no more than 180W at idle
- Operating Temperature: 0C to 40C at 95% relative humidity (non-condensing)
134 322 
, 24/09/2018
 1 .